Most spas and in-house
baths are using:
1) Sump Pumps or Vacuum Pumps to pump out
the clay into the toilet or other area. However,
there is the option of using
2) CDA's, our Clay Disolving Agents. (Each
set contains two packets for use with each 2 1/2 cups
of clay). Using this formula of 2 1/2 cups of clay
per each SET of CDA's the amount for one 5-gallon bucket
would be 28 sets of CDA's
3) Duck Tape on overflow drain and tub drain along
with use of a "Drain Guard" and flat stopper found
at any large hardware store for around $4.00 for
the set. The "Drain Guard" as it is called
at Lowe's Hardware is a plastic-like sieve that fits
almost any drain with a large flat stopper over it.
When the flat stopper is removed after the bath,
the clay water goes through the "Drain Guard" sieve
and catches any kind of clay lump that may not have
been dissolved properly. If you do not have access
to these we sell them (order).
Instructions for CDA's: CDA #1 packet is a
smaller packet that is put into the tub first for 10
minutes and CDA #2 (larger packet) is added into the
tub after the 10 minutes, for another 20 minutes to
assist in re-dissolving the clay into liquid form and
neutralizing many of the toxins and assisting in the
clean-up of the baths. |